IGCSE Year 10 / Physics / Curriculum
Practical physics and measurement: structured theory, worked examples, answered practice, and a mastery checklist for IGCSE Year 10.
Раздел
Ключевые идеи главы в понятной последовательности перед практикой.
Every measurement identifies a physical quantity, numerical value, unit, and suitable instrument. A value without a unit is incomplete physical information.
Change one independent variable, measure the dependent variable, and control the rest. Repeats improve reliability.
A graph reveals trends and allows slope or intercept analysis. Uncertainty and anomalous points should be discussed, not hidden.
For “SI units”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
For “Scalars and vectors”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
For “Measurement techniques”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
For “Graphs”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
For “Uncertainty in simple form”, start from an observation or model, define quantities and units where relevant, and separate the changed factor from the measured outcome. Support the conclusion with data and state the test's limitations.
Physics
Следуйте методу шаг за шагом и проверяйте обоснование каждого шага.
Length readings are 10.30, 10.30, 10.30 cm. Find the mean and report suitable precision.
Mean ≈ 10.30 cm.
Before calculating, explain the key idea from “SI units” and which conditions must be checked.
The answer should show not only which rule is used for “SI units”, but also why it is valid here.
Practical physics and measurement
Восемь заданий от базовых навыков до экзаменационного уровня. Сначала решите самостоятельно.
Readings: 7.0, 7.2, 6.9 cm. Find the mean and half-range uncertainty.
Mean = sum/3; uncertainty = (max-min)/2.
7.033333333333333 cm ≈ 7.03 cm; ±0.15 cm.
Design a valid investigation for “Scalars and vectors” with independent, dependent, and 4 controlled variables.
Include range, repeats, and safety.
Full method: clear variables, at least five values, repeats/mean, suitable instruments, 4 controls, and specific safety.
Structure a solution for “Measurement techniques”: givens, SI units, law, substitution, and interpretation.
State the law before substituting numbers.
A full solution states symbols/units, selects a valid law for “Measurement techniques”, shows substitution and calculation, and interprets the result.
Identify three uncertainty sources in measuring “Graphs” and improve each one.
Consider instrument resolution, reaction time, repeats, and controls.
A full response links each specific error source to a targeted improvement and identifies random or systematic impact.
Plan a suitable graph for “Uncertainty in simple form” data and explain how to obtain a gradient or relationship.
Put the independent variable on x and dependent variable on y.
A full response labels axes/units, uses a suitable scale and best fit; gradient uses a large triangle and is interpreted with units.
Check whether a result for “Planning investigations” is sensible using units, order of magnitude, and a limiting case.
A check should not merely repeat the same calculation.
A full check confirms dimensions/units, compares expected magnitude, and tests behaviour when one variable becomes very small or large.
Connect “Evaluation of experiments” to energy conservation or a force/field model and justify the choice.
Define the system and interactions.
A full response defines the system, describes transfer or interaction, applies the appropriate model, and states losses or limitations.
Write a multi-step exam response about “SI units” with calculation and evaluation.
Separate givens, model, calculation, result, and evaluation.
A full response includes an appropriate diagram/model, laws, algebraic rearrangement, SI substitution, suitably precise result, and evaluation of assumptions.
Practical physics and measurement
Шесть разных заданий от базового уровня до сложного с временем, подсказками и ответами.
Homework 1: Readings: 3.0, 3.2, 2.9 cm. Find the mean and half-range uncertainty.
Mean = sum/3; uncertainty = (max-min)/2.
3.033333333333333 cm ≈ 3.03 cm; ±0.15 cm.
Homework 2: Design a valid investigation for “Scalars and vectors” with independent, dependent, and 5 controlled variables.
Include range, repeats, and safety.
Full method: clear variables, at least five values, repeats/mean, suitable instruments, 5 controls, and specific safety.
Homework 3: Structure a solution for “Measurement techniques”: givens, SI units, law, substitution, and interpretation.
State the law before substituting numbers.
A full solution states symbols/units, selects a valid law for “Measurement techniques”, shows substitution and calculation, and interprets the result.
Homework 4: Identify three uncertainty sources in measuring “Graphs” and improve each one.
Consider instrument resolution, reaction time, repeats, and controls.
A full response links each specific error source to a targeted improvement and identifies random or systematic impact.
Homework 5: Plan a suitable graph for “Uncertainty in simple form” data and explain how to obtain a gradient or relationship.
Put the independent variable on x and dependent variable on y.
A full response labels axes/units, uses a suitable scale and best fit; gradient uses a large triangle and is interpreted with units.
Homework 6: Check whether a result for “Planning investigations” is sensible using units, order of magnitude, and a limiting case.
A check should not merely repeat the same calculation.
A full check confirms dimensions/units, compares expected magnitude, and tests behaviour when one variable becomes very small or large.
50 минут / 40 баллов
Полный тест с таймером, баллами и образцами ответов.
Start the timer when ready, work without notes, show every step, and open model answers only after finishing.
1. Readings: 8.0, 8.2, 7.9 cm. Find the mean and half-range uncertainty.
2 баллов8.033333333333333 cm ≈ 8.03 cm; ±0.15 cm.
2. Design a valid investigation for “Scalars and vectors” with independent, dependent, and 5 controlled variables.
3 балловFull method: clear variables, at least five values, repeats/mean, suitable instruments, 5 controls, and specific safety.
3. Structure a solution for “Measurement techniques”: givens, SI units, law, substitution, and interpretation.
3 балловA full solution states symbols/units, selects a valid law for “Measurement techniques”, shows substitution and calculation, and interprets the result.
4. Identify three uncertainty sources in measuring “Graphs” and improve each one.
4 балловA full response links each specific error source to a targeted improvement and identifies random or systematic impact.
5. Plan a suitable graph for “Uncertainty in simple form” data and explain how to obtain a gradient or relationship.
4 балловA full response labels axes/units, uses a suitable scale and best fit; gradient uses a large triangle and is interpreted with units.
6. Check whether a result for “Planning investigations” is sensible using units, order of magnitude, and a limiting case.
4 балловA full check confirms dimensions/units, compares expected magnitude, and tests behaviour when one variable becomes very small or large.
7. Connect “Evaluation of experiments” to energy conservation or a force/field model and justify the choice.
5 балловA full response defines the system, describes transfer or interaction, applies the appropriate model, and states losses or limitations.
8. Write a multi-step exam response about “SI units” with calculation and evaluation.
5 балловA full response includes an appropriate diagram/model, laws, algebraic rearrangement, SI substitution, suitably precise result, and evaluation of assumptions.
9. Compare two methods for investigating “Scalars and vectors” and select the more reliable using criteria.
5 балловThe choice must use at least three comparable criteria and acknowledge one trade-off or limitation.
10. Create an extension question about “Measurement techniques”, a prediction, and a data-collection plan.
5 балловA full response gives a testable question, justified prediction, independent-variable range, repeats, and an analysis method.
Раздел
Источники программы; порядок тем уточняйте в школе и у преподавателя.
Physics
IGCSE Year 10: структурированный маршрут по математике и физике с главами, практикой и следующими шагами.
Структура следует учебнику и помогает организовать изучение темы.
Темы, где чаще возникают ошибки или нужна дополнительная практика.
С чего начать: учебник, daily material, PDFs, videos и worked examples.
Целевая практика перед full tests, чтобы coverage было понятным.
Как измерять прогресс по главе и когда включать ее в общий mock.
Что делать после главы и как она связана со следующим разделом.
Примечание: официальную экзаменационную программу каждого года всегда уточняйте в школе, у преподавателя и по текущим официальным источникам.
